3. Statutory Approvals Status
Statutory Approvals Statutory Approvals Status Date I. ENVIRONMENTAL CLEARANCE ALREADY BEEN OBTAINED 26-11-2021 II. RENEWAL OF LICENSE ALREADY BEEN OBTAINED 19-08-2021 III. BUILDING PLAN ALREADY BEEN OBTAINED 17-05-2022 IV. DRINING WATER ASSURANCE ALREADY BEEN OBTAINED 04-08-2021 V. SEWAGE DISPOSAL ALREADY BEEN OBTAINED 23-07-2021 VI. STROM WATER ALREADY BEEN OBTAINED 23-07-2021 VII. ZONING PLAN ALREADY BEEN OBTAINED 01-02-2022 VIII. AIRPORT HEIGHT CLEARANCE ALREADY BEEN OBTAINED 06-08-2021
It is undertaken that the project shall be completed within the time schedule given in Part C and the same will not be delayed on account of non- receipt of any of the statutory approval. The liability for the non-receipt of any of the statutory approval shall be that of the promoter and in case of delay, compensation as per law may be given to the allottees.
		Signature _____________ Seal _____________ Date _____________

FORM REP-I
Part - F
1. A copy of the draft allotment letter by which the apartment shall be allotted/ booked in favour of the apartment buyers. (Annex a copy in Folder F)		Yes
2. A copy of the Draft Agreement which shall be made before seeking any deposit exceeding 10% of the cost of the apartment. (Based on the model agreement prescribed in the Rules) (Annex a copy in Folder F)		Yes
3. Gist of the important provisions of the Draft Agreement (Annex a copy in Folder F)
I hereby declare that the above information and particulars are based on record and are true to the best of my knowledge and belief and nothing has been concealed.
		Signature of the Applicant / Authorised Representative Stamp _____________ Date _____________

FORM REP-I
Part - G
Projects launched by the promoter in last five years: (No Projects)
I hereby declare that the above information and particulars are based on record and are true to the best of my knowledge and belief and nothing has been concealed.
	Signature of the Applicant / Authorised Representative Stamp _____________ Date _____________

FORM REP-I

Part - H

SPECIFICATION OF CONSTRUCTION Specification of apartments and other buildings including the following: 1 FLOORING DETAILS OF VARIOUS PARTS OF HOUSE VITRIFIED TILES (600X600) OR (800X800). 2 WALL FINISHING DETAILS SAND-CEMENT PLASTER AND A COAT OF POP WITH COATING OF EMULSION PAINT. 3 KITCHEN DETAILS TILES - SAND-CEMENT PLASTER AND A COAT OF POP WITH COATING OF EMULSION PAINT. 4 BATHROOM FITTINGS NA 5 WOOD WORK ETC NA 6 DOORS AND WINDOS FRAMES 2 TO 3 TRACK ALUMINIUM/UPVC FRAMED WINDOW, WITH 2 TO 3 SLIDING PANELS DEPENDING UPON SIZE WITH CLEAR FLOAT GLASS AND PROVISION FOR FLY MESH SHUTTER. 7 GLASS WORK GLASS, PLAIN/CLEAR/FROSTED, IS WIDELY USED IN RESIDENTIAL DEVELOPMENTS AND MAY BREAK/ SHATTER DUE TO ACCIDENTAL KNOCKS OR OTHER CAUSES. 8 ELECTRIC FITTINGS MODULAR ELECTRICAL SWITCHES WITH SOCKETS AND FAN REGULATORS OF SSK/ANCHOR/NORTH WEST/LEGRAND OR EQUIVALENT 9 CONDUCTING AND WIRING DETAILS ALL ELECTRICAL WIRING IN CONCEALED CONDUITS WITH COPPER WIRES. CONVENIENT POSITION & DISTRIBUTION OF LIGHT AND POWER PLUGS AND PROVISION FOR ELECTRICAL CHIMNEY ABOVE PLATFORM AND WATER PURIFIER POINT IN KITCHEN 10 CUPBOARD DETAILS NA 11 WATER STORAGE NA 12 LIFT DETAILS NA 13 EXTERNAL GLAZINGS NA 13.1 WINDOWS/GLAZINGS NA 14 DOORS NA 14.1 MAIN DOORS 1 HOUR FIRE RATED MS/ WOODEN SHUTTER WITH HANDLE AND LOCK SYSTEM, MAIN DOOR FRAME ARE EITHER ENAMEL PAINTED/POWDER COATED / POLISH FINISH. 14.2 INTERNAL DOORS FLUSH DOOR OR MOULDED SKIN DOORS, OTHER DOOR FRAMES ARE ENAMEL PAINTED 15 AIR CONDITIONING PROVISION FOR FIXING OF WINDOW/SPLIT AIR CONDITIONER IN DRAWING DINING AREA & BEDROOMS ARE BEING PROVIDED. FOR SPLIT A/C ASSIGNED SPACES ARE EARMARKED ON THE ELEVATION OF THE BUILDING FOR EASE OF ACCESS AND TO CREATE UNIFORMITY FOR AESTHETIC PURPOSE 16 ELECTRICAL FITTINGS NA 17 CNG PIPE LINE PIPED LPG GAS WITH LPG METER WILL BE PROVIDED 18 PROVISION OF WIFI AND BROADBAND FACILITY IF THE PURCHASER REQUIRES INTERNET ACCESS & CABLE TELEVISION, THE PURCHASER WILL HAVE TO MAKE DIRECT ARRANGEMENTS WITH THE SERVICE PROVIDER /OR SUCH RELEVANT ENTITIES/AUTHORITIES FOR SERVICES TO THE UNIT AND TO MAKE ALL NECESSARY PAYMENT. 19 EXTERNAL FINISHING/COLOUR SCHEME ALL EXTERNAL WALLS INCLUDING ROOF TERRACE, OPEN TERRACE, BALCONY: CEMENT SAND PLASTER WITH SPRAY TEXTURE/COATING AND/OR EMULSION PAINT FINISH. 20 INTERNAL FINISHING LIFT LOBBY IN BASEMENT, STILT/GROUND FLOOR AND UPPER FLOORS: GRANITE AND/OR MARBLE AND/OR QUARTZ STONE AND /VITRIFIED TILES AND/OR CERAMIC TILES AND/OR CEMENT SAND PLASTER AND/OR OTHER LOCAL STONE AND/OR COMBINATION OF ANY TWO OR MORE ITEMS WITH EMULSION PAINT FINISH (WHEREVER APPLICABLE).

SPECIFICATION UNIT WISE 1 . LIVING/DINING/FOYER/FAMILY LOUNGE 1 . 1 FLOOR VITRIFIED TILES (600X600) OR (800X800) 1 . 2 WALLS INTERNAL: BRICK WALL OF CLAY BRICKS/FLY ASH BRICKS/AAC BLOCKS/SOLID CONCRETE BLOCK/HOLLOW CONCRETE BLOCK 1 . 3 CEILING PLASTERED WITH EITHER SAND-CEMENT MORTAR AND A COAT OF PLASTER OF PARIS OR GYPSUM. PLEASING SHADE EMULSION PAINT (PLASTIC/ACRYLIC AS PER ARCHITECT'S RECOMMENDATION) FINISH OF APPROPRIATE QUALITY 2 . MASTER BEDROOM/DRESSROOM 2 . 1 FLOOR VITRIFIED TILES (600X600) OR (800X800) 2 . 2 WALLS BRICK WALL OF CLAY BRICKS/FLY ASH BRICKS/AAC BLOCKS/SOLID CONCRETE BLOCK/HOLLOW CONCRETE BLOCK 2 . 3 CEILING PLASTERED WITH EITHER SAND-CEMENT MORTAR AND A COAT OF PLASTER OF PARIS OR GYPSUM PLEASING SHADE EMULSION PAINT (PLASTIC/ACRYLIC AS PER ARCHITECT'S RECOMMENDATION) FINISH OF APPROPRIATE QUALITY 2 . 4 MODULAR WARDROBES NA 3 . MASTER TOILET 3 . 1 FLOOR CERAMIC TILES (300X300 OR OTHER SIZES UP TO 600X600) AND/OR COMBINATION 3 . 2 WALLS CERAMIC TILES UP TO 2.0 TO 2.1 M HEIGHT FROM FLOOR LEVEL AND ABOVE THE TILES - SAND-CEMENT PLASTER AND A COAT OF POP WITH COATING OF EMULSION PAINT 3 . 3 CEILING PLASTERED WITH EITHER SAND-CEMENT MORTAR AND A COAT OF PLASTER OF PARIS OR GYPSUM PLEASING SHADE EMULSION PAINT (PLASTIC/ACRYLIC AS PER ARCHITECT'S RECOMMENDATION) FINISH OF APPROPRIATE QUALITY 3 . 4 COUNTERS NA 3 . 5 SANITARY WARE/CP FITTINGS 1 WASH BASIN FITTED UNDER/OVER MARBLE/GRANITE QUARTZ STONE COUNTER OR 1 RECESSED WASH BASIN FACTORY MOULDED WITH SAME VITRIFIED COUNTER LEDGE (B) 1 FLOOR MOUNTED EWC WITH 6 LITER CAPACITY DUAL FLUSH TYPE VITRIFIED CISTERN WITH SEAT AND SEAT COVER. (C) A GLASS CURTAIN AS PER DESIGN OF THE ARCHITECT (500MM TO 700MM) AS A PARTITION TO SEGREGATE SHOWER AREA FROM REST OF THE AREA SHALL BE PROVIDED IN MASTER BATHROOM ONLY. 3 . 6 FITTING/FIXTURES A SINGLE LEVER HALF/QUARTER TURN CP BASIN MIXER IN WASH BASIN, A SINGLE LEVER WALL MIXER WITH OVER HEAD SHOWER AND A SPOUT IN SHOWER AREA. (E) 1 CP ANGLE VALVE ALONG WITH CHROME PLATED PVC SEMI RIGID/FLEXIBLE HEALTH FAUCET OF STANDARD MAKE. (F) 2 CP ANGLE VALVE OF STANDARD MAKE FOR IN AND OUT OF HOT WATER GEYSER (G) 2 ANGLE VALVES FOR WATER CONNECTION TO WASH BASIN AND 1 ANGLE VALVE FOR WATER CONNECTION TO FLUSHING CISTERN AND 1 BOTTLE TRAP OF STANDARD MAKE PTMT MATERIAL 4 . BED ROOMS 4 . 1 FLOOR VITRIFIED TILES (600X600) OR (800X800). 4 . 2 WALLS BRICK WALL OF CLAY BRICKS/FLY ASH BRICKS/AAC BLOCKS/SOLID CONCRETE BLOCK/HOLLOW CONCRETE BLOCK 4 . 3 CEILING PLASTERED WITH EITHER SAND-CEMENT MORTAR AND A COAT OF PLASTER OF PARIS OR GYPSUM PLEASING SHADE EMULSION PAINT (PLASTIC/ACRYLIC AS PER ARCHITECT'S RECOMMENDATION) FINISH OF APPROPRIATE QUALITY 4 . 4 WARDROBES NA 5 . TOILET 5 . 1 FLOOR CERAMIC TILES (300X300 OR OTHER SIZES UP TO 600X600) AND/OR COMBINATION 5 . 2 WALLS CERAMIC TILES UP TO 2.0 TO 2.1 M HEIGHT FROM FLOOR LEVEL AND ABOVE THE TILES - SAND-CEMENT PLASTER AND A COAT OF POP WITH COATING OF EMULSION PAINT. 5 . 3 CEILING PLASTERED WITH EITHER SAND-CEMENT MORTAR AND A COAT OF PLASTER OF PARIS OR GYPSUM PLEASING SHADE EMULSION PAINT (PLASTIC/ACRYLIC AS PER ARCHITECT'S RECOMMENDATION) FINISH OF APPROPRIATE QUALITY 5 . 4 COUNTERS NA 5 . 5 SANITARY WARE/CP FITTINGS 1 WASH BASIN FITTED UNDER/OVER MARBLE/GRANITE QUARTZ STONE COUNTER OR 1 RECESSED WASH BASIN FACTORY MOULDED WITH SAME VITRIFIED COUNTER LEDGE (B) 1 FLOOR MOUNTED EWC WITH 6 LITER CAPACITY DUAL FLUSH TYPE VITRIFIED CISTERN WITH SEAT AND SEAT COVER. 5 . 6 FIXTURES 1 CP ANGLE VALVE ALONG WITH CHROME PLATED PVC SEMI RIGID/FLEXIBLE HEALTH FAUCET OF STANDARD MAKE. (F) 2 CP ANGLE VALVE OF STANDARD MAKE FOR IN AND OUT OF HOT WATER GEYSER 1 TOWEL ROD, A 3 TO 5 MM THICK MIRROR OF MIN SIZE 450MMX550 MM (I) 1 TOWEL RACK INSTEAD OF TOWEL ROD SHALL BE PROVIDED IN MASTER TOILET ONLY 6 . KITCHEN 6 . 1 FLOOR VITRIFIED TILES (600X600) OR (800X800) 6 . 2 WALLS CERAMIC TILES 0.60 METER FROM COUNTERTOP AND ABOVE THE TILES - SAND-CEMENT PLASTER AND A COAT OF POP WITH COATING OF EMULSION PAINT 6 . 3 CEILING PLASTERED WITH EITHER SAND-CEMENT MORTAR AND A COAT OF PLASTER OF PARIS OR GYPSUM PLEASING SHADE EMULSION PAINT (PLASTIC/ACRYLIC AS PER ARCHITECT'S RECOMMENDATION) FINISH OF APPROPRIATE QUALITY 6 . 4 COUNTERS NA 6 . 5 FIXTURES 2 CP ANGLE VALVE FOR IN AND OUT OF HOT WATER GEYSER. (D) 1 CP ANGLE VALVE FOR WATER PURIFIER UNIT/RO (E) NO TAP IS PROVIDED BELOW SINK. 6 . 6 KITCHEN APPLIANCES 1 STAINLESS STEEL SINK WITH ONE BOWL A DRAIN BOARD. (B) 1 SWIVAL TYPE SINK MIXER PIPED LPG GAS WITH LPG METER WILL BE PROVIDED 7 . UTILITY ROOMS/UTILITY BALCONY/TOILET 7 . 1 FLOOR CERAMIC TILES (300X300 OR OTHER SIZES UP TO 450X450 AND/OR COMBINATION) SUITABLE QUALITY GLAZED/MATT FINISH 7 . 2 WALLS & CEILING CERAMIC TILES 0.60 METER FROM COUNTERTOP AND ABOVE THE TILES - SAND-CEMENT PLASTER AND A COAT OF POP WITH COATING OF EMULSION PAINT PLASTERED WITH EITHER SAND-CEMENT MORTAR AND A COAT OF PLASTER OF PARIS OR GYPSUM PLEASING SHADE EMULSION PAINT (PLASTIC/ACRYLIC AS PER ARCHITECT'S RECOMMENDATION) FINISH OF APPROPRIATE QUALITY 7 . 3 TOILET NA 7 . 4 BALCONY NA 8 . SIT-OUTS 8 . 1 FLOOR NA 8 . 2 WALLS & CEILING NA 8 . 3 RAILINGS NA 8 . 4 FIXTURES NA
I hereby declare that the above information and particulars are based on record and are true to the best of my knowledge and belief and nothing has been concealed.
		Signature of the Applicant / Authorised Representative Stamp _____________ Date _____________

Print